500 SQFT Complete Epoxy Flake Kit

POTLIFE WARNING: DO NOT LEAVE MIXED EPOXY IN THE BUCKET, EPOXY WILL SET WITHIN 15 MINUTES IF LEFT IN BUCKET.  POUR ON FLOOR IN STRIPES IMMEDIATELY AFTER MIXING FOR LONGEST WORKING TIME +/- 40 MINUTES.

500 Sq. Ft. Complete Epoxy Flake Floor Kit includes 9 gallons of epoxy for up to 500 square feet of floor.

3 gallons CFS-Low Viscosity Primer (Vapor barrier rated up to 3 pounds per 1000 ft.² of vapor transmission)

3 gallons CFS-Intermediate Coat

Up to 50 pounds of blended flakes, available in  1/8″ | 1/4″ | 1/2″ sizes

1 pint tabular alumina non-skid additive (aluminum oxide)

3 gallons CFS-UV Clear Epoxy Top Coat: High gloss, NOT 100% UV stable, Low Odor, Slow Setting, very easy to install.

OR

Upgrade topcoat to:

*(MOST UPGRADES NOT AVAILABLE TO CALIFORNIA SCAQMD RESIDENTS)

3 Gallons CFS-High Performance Urethane: Gloss, 100% UV stable, High Odor, Thin Mil Coating. (LEAVES MORE TEXTURE ON FLOOR)

4 Gallons CFS-2C Polyaspartic: Two component, High Gloss, 100% UV stable,  Very Low Odor, slow setting, easy to install, 35-45 minute working time. (This coating is California / scaqmd compliant)

4 Gallons CFS-1C Polyaspartic: Single component, High Gloss, 100% UV stable, Very High Odor, slow setting, easy to install, 30-40 minute working time.

500 Sq. Ft. Complete Epoxy Flake Floor Kit includes 9 gallons of epoxy total, 30 mil thickness (not including the thickness of the flakes that are included with this system)